Cisco ASA 5505 Configuration Manual page 326

Configuring Time Ranges
Add/Edit Recurring Time Range
The Configuration > Global Objects > Time Ranges > Add/Edit Time Range >
Add/Edit Periodic Time Range pane lets you fine time ranges further by letting you configure them on
a daily or weekly basis.
For detailed steps on adding a recurring time range to an access rule, see the
an Access Rule" section on page
Creating a time range does not restrict access to the device. This pane defines the time range only.
Note
Add/Edit Recurring Time Range Field Descriptions
•
•
Cisco ASA 5500 Series Configuration Guide using ASDM
13-18
Days of the week
Every day—Specifies every day of the week.
–
Weekdays—Specifies Monday through Friday.
–
Weekends—Specifies Saturday and Sunday.
–
On these days of the week—Lets you choose specific days of the week.
–
– Daily Start Time—Specifies the hour and the minute that the time range begins.
– Daily End Time (inclusive) area—Specifies the hour and the minute that the time range ends.
The end time specified is inclusive.
Weekly Interval
– From—Lists the day of the week, Monday through Sunday.
– Through—Lists the day of the week, Monday through Sunday.
– Hour—Lists the hour, in the range of 00 through 23.
Minute—Lists the minute, in the range of 00 through 59.
–
13-16.
Chapter 13 Configuring Objects
"Adding a Time Range to
OL-20339-01