Cisco ASA 5505 Configuration Manual page 906

RADIUS Accounting Inspection
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
RADIUS Accounting Inspection
This section describes the IM inspection engine. This section includes the following topics:
•
•
•
•
•
•
Cisco ASA 5500 Series Configuration Guide using ASDM
40-12
Action—Drop packet or limit rate (pps).
–
Log—Enable or disable.
–
Message Length Criterion Values—Lets you change the default for the maximum message length
for the UDP payload that is allowed.
Minimum value—Specifies the minimum number of bytes in the UDP payload. The range is
–
from 1 to 65536.
– Maximum value—Specifies the maximum number of bytes in the UDP payload. The range is
from 1 to 65536.
– Action—Drop packet.
– Log—Enable or disable.
Version Criterion Values—Specifies the GTP version for messages that you want to match. The valid
range is 0-255. Use 0 to identify Version 0 and 1 to identify Version 1. Version 0 of GTP uses port
3386, while Version 1 uses port 2123. By default all GTP versions are allowed.
Value—Specifies whether value is an exact match or a range.
–
Equals—Enter a value.
Range—Enter a range of values.
– Action—Drop packet.
– Log—Enable or disable.
Security Context
Transparent Single
• •
RADIUS Accounting Inspection Overview, page 40-13
Select RADIUS Accounting Map, page 40-13
Add RADIUS Accounting Policy Map, page 40-14
RADIUS Inspect Map, page 40-14
RADIUS Inspect Map Host, page 40-15
RADIUS Inspect Map Other, page 40-15
Chapter 40 Configuring Inspection for Management Application Protocols
Multiple
Context System
—
•
OL-20339-01