Cisco ASA 5505 Configuration Manual page 361

Chapter 18 Information About Routing
Features that Support IPv6
The following features support IPv6:
For features that use the Modular Policy Framework, be sure to use the match any command to match
Note
IPv6 traffic; other match commands do not support IPv6.
•
•
•
•
•
•
•
•
•
Failover does not support IPv6. The ipv6 address command does not support setting standby addresses
Note
for failover configurations. The failover interface ip command does not support using IPv6 addresses
on the failover and Stateful Failover interfaces.
IPv6-Enabled Commands
The following adaptive security appliance commands can accept and display IPv6 addresses:
•
•
•
•
•
•
•
•
•
OL-20339-01
The following application inspections support IPv6 traffic:
– FTP
HTTP
–
ICMP
–
SIP
–
SMTP
–
IPSec-pass-thru
–
IPS
NetFlow Secure Event Logging filtering
Connection limits, timeouts, and TCP randomization
TCP Normalization
TCP state bypass
Access group, using an IPv6 access list
Static Routes
VPN (all types)
capture
configure
copy
http
name
object-group
ping
show conn
show local-host
Cisco ASA 5500 Series Configuration Guide using ASDM
Information About IPv6 Support
18-9