Cisco ASA 5505 Configuration Manual page 306

Configuring Packet Redirection
Configuring Packet Redirection
To configure packet redirection on the ingress of an interface using WCCP, perform the following steps:
Step 1 In the ASDM main application window, choose Configuration > Device Management > Advanced >
WCCP > Redirection.
To add a new WCCP packet redirection, click Add to display the Add WCCP Redirection dialog box.
Step 2
To modify an existing WCCP packet redirection, click Edit to display the Edit WCCP Redirection dialog
Step 3
box.
To remove a selected WCCP packet redirection, click Delete.
Step 4
To continue, see the
Step 5
Adding or Editing Packet Redirection
To add or change packet redirection on the ingress of an interface using WCCP, perform the following
steps:
Choose the interface on which to enable WCCP redirection from the drop-down list.
Step 1
Choose the service group from the drop-down list.
Step 2
Click OK to close the Edit WCCP Redirection dialog box.
Step 3
(Optional) If you need to create a new service group, click New to display the Add Service Group dialog
Step 4
box.
(Optional) To continue, see the
Step 5
WCCP Monitoring
To monitor WCCP, perform the following steps:
Path
Tools > Command Line Interface
Type show running-config wccp, then click Send.
Tools > Command Line Interface
Type show running-config wccp interface, then click Send.
Monitoring > Properties > WCCP > WCCP Service
Groups
Monitoring > Properties > WCCP > WCCP Redirection
Cisco ASA 5500 Series Configuration Guide using ASDM
12-4
"Adding or Editing Packet Redirection" section on page
"Adding or Editing WCCP Service Groups" section on page
Purpose
Shows the current WCCP configuration.
Shows the current WCCP interfaces status.
Shows configured WCCP service groups.
Shows configured WCCP interface statistics.
Chapter 12 Configuring Web Cache Services Using WCCP
12-4.
12-3.
OL-20339-01