Starting Asdm From A Web Browser - Cisco ASA 5505 Configuration Manual

Starting ASDM
•
To run ASDM in Demo Mode, perform the following steps:
Download the ASDM Demo Mode installer, asdm-demo-version.msi, from the following location:
Step 1
http://www.cisco.com/cisco/web/download/index.html.
Step 2 Double-click the installer to install the software.
Step 3 Double-click the Cisco ASDM Launcher shortcut on your desktop, or open it from the Start menu.
Check the Run in Demo Mode check box.
Step 4
The Demo Mode window appears.

Starting ASDM from a Web Browser

To start ASDM from a web browser, perform the following steps:
From a supported web browser on the adaptive security appliance network, enter the following URL:
Step 1
https://interface_ip_address
Where interface_ip_address is the IP address of ASDM on the adaptive security appliance network.
Note In transparent firewall mode, enter the management IP address. Be sure to enter
Step 2 Click OK or Yes to all browser prompts, including the username and password, which you should leave
blank.
The Cisco ASDM 6.3(1) Welcome page displays with the following buttons:
•
•
•
Click Run ASDM.
Step 3
Click OK or Yes to all the browser prompts.
Step 4
Cisco ASA 5500 Series Configuration Guide using ASDM
2-4
Toolbar/Status bar > Save
–
Configuration > Interface > Edit Interface > Renew DHCP Lease
–
Configuring a standby device after failover
–
Operations that cause a rereading of the configuration, in which the GUI reverts to the original
configuration:
Switching contexts
–
Making changes in the Interface pane
–
NAT pane changes
–
Clock pane changes
–
Install ASDM Launcher and Run ASDM
Run ASDM
Run Startup Wizard
Chapter 2 Getting Started
, not .
https http
OL-20339-01