Cisco ASA 5505 Configuration Manual page 868

RTSP Inspection
Add/Edit RTSP Policy Map
The Add/Edit RTSP Policy Map pane lets you configure the parameters and inspections settings for
RTSP application inspection maps.
Fields
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add/Edit RTSP Inspect
The Add/Edit RTSP Inspect dialog box lets you define the match criterion, values, and actions for the
RTSP inspect map.
Fields
•
Cisco ASA 5500 Series Configuration Guide using ASDM
38-22
Name—When adding an RTSP map, enter the name of the RTSP map. When editing an RTSP map,
the name of the previously configured RTSP map is shown.
Description—Enter the description of the RTSP map, up to 200 characters in length.
Parameters—Tab that lets you restrict usage on reserved ports during media port negotiation, and
lets you set the URL length limit.
– Enforce Reserve Port Protection—Lets you restrict the use of reserved ports during media port
negotiation.
Maximum URL Length—Specifies the maximum length of the URL allowed in the message.
–
Maximum value is 6000.
Inspections—Tab that shows you the RTSP inspection configuration and lets you add or edit.
Match Type—Shows the match type, which can be a positive or negative match.
–
Criterion—Shows the criterion of the RTSP inspection.
–
– Value—Shows the value to match in the RTSP inspection.
– Action—Shows the action if the match condition is met.
– Log—Shows the log state.
Add—Opens the Add RTSP Inspect dialog box to add a RTSP inspection.
–
Edit—Opens the Edit RTSP Inspect dialog box to edit a RTSP inspection.
–
Delete—Deletes a RTSP inspection.
–
Move Up—Moves an inspection up in the list.
–
Move Down—Moves an inspection down in the list.
–
Security Context
Transparent Single
• •
Match Type—Specifies whether traffic should match or not match the values.
Chapter 38 Configuring Inspection for Voice and Video Protocols
Multiple
Context System
—
•
OL-20339-01