Cisco ASA 5505 Configuration Manual page 594

Configuration Examples for Twice NAT
Figure 28-73
By default, the NAT rule is added to the end of section 1. If you want to add a NAT rule to section 3,
after the network object NAT rules, choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.
Figure 28-74
Set the real and mapped interfaces:
Step 11
Figure 28-75
For the Original Source Address, type the name of the inside network object (myInsideNetwork) or click
Step 12
the browse button
For the Original Destination Address, type the name of the Telnet/web server network object
Step 13
(TelnetWebServer) or click the browse button
Cisco ASA 5500 Series Configuration Guide using ASDM
28-34
Adding a NAT Rule
Add NAT Rule Dialog Box
Setting the Interfaces
to choose it.
Chapter 28
to choose it.
Configuring Twice NAT
OL-20339-01