Cisco ASA 5505 Configuration Manual page 76

Unsupported Commands
Table 1-5
Unsupported Commands
sysopt uauth allow-http-cache
terminal
Effects of Unsupported Commands
If ASDM loads an existing running configuration and finds other unsupported commands, ASDM
operation is unaffected. To view the unsupported commands, choose Tools > Show Commands Ignored
by ASDM on Device.
Discontinuous Subnet Masks Not Supported
ASDM does not support discontinuous subnet masks such as 255.255.0.255. For example, you cannot
use the following:
ip address inside 192.168.2.1 255.255.0.255
Interactive User Commands Not Supported by the ASDM CLI Tool
The ASDM CLI tool does not support interactive user commands. If you enter a CLI command that
requires interactive confirmation, ASDM prompts you to enter "[yes/no]" but does not recognize your
input. ASDM then times out waiting for your response.
For example:
1.
2.
3.
Workaround:
•
•
Cisco ASA 5500 Series Configuration Guide using ASDM
1-14
List of Unsupported Commands
From the ASDM Tools menu, click Command Line Interface.
Enter the crypto key generate rsa command.
ASDM generates the default 1024-bit RSA key.
Enter the crypto key generate rsa command again.
Instead of regenerating the RSA keys by overwriting the previous one, ASDM displays the following
error:
Do you really want to replace them? [yes/no]:WARNING: You already have RSA
ke0000000000000$A key
Input line must be less than 16 characters in length.
%Please answer 'yes' or 'no'.
Do you really want to replace them [yes/no]:
%ERROR: Timed out waiting for a response.
ERROR: Failed to create new RSA keys names <Default-RSA-key>
You can configure most commands that require user interaction by means of the ASDM panes.
For CLI commands that have a noconfirm option, use this option when entering the CLI command.
For example:
crypto key generate rsa noconfirm
Chapter 1 Introduction to the Cisco ASA 5500 Series Adaptive Security Appliance
(continued)
ASDM Behavior
Ignored.
Ignored.
OL-20339-01