TFTP Inspection
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
TFTP Inspection
TFTP inspection is enabled by default.
TFTP, described in RFC 1350, is a simple protocol to read and write files between a TFTP server and
client.
Cisco ASA 5500 Series Configuration Guide using ASDM
37-60
8bit
base64
binary
others
quoted-printable
Add—Adds the selected parameter from the Available Encodings table to the Selected
–
Encodings table.
Remove—Removes the selected command from the Selected Commands table.
–
Action—Reset, Drop Connection, Log.
–
Log—Enable or disable.
–
Sender Address Criterion Values—Specifies the value details for sender address match.
Regular Expression—Lists the defined regular expressions to match.
–
Manage—Opens the Manage Regular Expressions dialog box, which lets you configure regular
–
expressions.
Regular Expression Class—Lists the defined regular expression classes to match.
–
Manage—Opens the Manage Regular Expression Class dialog box, which lets you configure
–
regular expression class maps.
Action—Reset, Drop Connection, Log.
–
Log—Enable or disable.
–
Sender Address Length Criterion Values—Specifies the value details for sender address length
match.
Greater Than Length—Sender address length in bytes.
–
Action—Reset, Drop Connection, Log.
–
Log—Enable or disable.
–
Security Context
Transparent Single
•
•
Chapter 37
Configuring Inspection of Basic Internet Protocols
Multiple
Context
System
•
—
OL-20339-01