Cisco ASA 5505 Configuration Manual page 1020

Configuring Cisco Intercompany Media Engine Proxy
Command
Step 8
hostname(config-network-object)# exit
Step 9
hostname(config)# nat (inside,outside) source static
real_obj mapped_obj
Examples:
hostname(config)# nat (inside,outside) source static
ucm_real_192.168.10.30 ucm_209.165.200.228
hostname(config)# nat (inside,outside) source static
ucm_real_192.168.10.31 ucm_209.165.200.228
What to Do Next
Create the access lists for the Cisco Intercompany Media Engine Proxy. See
Cisco Intercompany Media Engine Proxy, page
Configuring PAT for the Cisco UCM Server
Perform this task as an alternative to configuring NAT for the Cisco Intercompany Media Engine Proxy.
Figure 47-8
Local Enterprise
Local Cisco UCMs
You only perform this step when NAT is not configured for the Cisco UCM server.
Note
To configure PAT for the Cisco UCM server, perform the following steps:
Cisco ASA 5500 Series Configuration Guide using ASDM
47-14
Example for Configuring PAT for a Deployment
192.168.10.30
199.168.10.31
M
M
TCP
Corporate
Network
IP
IP
IP
Chapter 47 Configuring Cisco Intercompany Media Engine Proxy
Purpose
Exits from the objects configuration mode.
Specifies the address translation on the network
objects created in this procedure.
Where real_obj is the name that you created in
Step 1 in this task.
Where mapped_obj is the name that you created in
Step 5 in this task.
47-16.
Configure PAT:
192.168.10.30:5070
192.168.10.31:5071
TLS
Local ASA
Outside Cisco UCM address
209.165.200.228
Creating Access Lists for
209.165.200.228:5570
209.165.200.228:5571
Internet
OL-20339-01