Configuration Examples for Network Object NAT
Figure 27-35
Enable dynamic NAT for the inside network:
Step 3
Figure 27-36
Step 4
For the Translated Addr field, add a new network object for the dynamic NAT pool to which you want
to translate the inside addresses by clicking the browse button
a.
Add the new network object.
Figure 27-37
Define the NAT pool addresses, and click OK.
b.
Cisco ASA 5500 Series Configuration Guide using ASDM
27-22
Defining the Inside Network Addresses
Enabling NAT
Adding a New Network Object for the NAT Pool
Chapter 27
Configuring Network Object NAT
.
OL-20339-01