Cisco ASA 5505 Configuration Manual page 840

SMTP and Extended SMTP Inspection
Add/Edit ESMTP Policy Map (Details)
The Add/Edit ESMTP Policy Map (Details) dialog box is accessible as follows:
Configuration > Global Objects > Inspect Maps > ESMTP > ESMTP Inspect Map > Advanced
View
The Add/Edit ESMTP Policy Map pane lets you configure the security level and additional settings for
ESMTP application inspection maps.
Fields
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Cisco ASA 5500 Series Configuration Guide using ASDM
37-56
Name—When adding an ESMTP map, enter the name of the ESMTP map. When editing an ESMTP
map, the name of the previously configured ESMTP map is shown.
Description—Enter the description of the ESMTP map, up to 200 characters in length.
Security Level—Shows the security level and mime file type filtering settings to configure.
Parameters—Tab that lets you configure the parameters for the ESMTP inspect map.
Mask server banner—Enforces banner obfuscation.
–
Configure Mail Relay—Enables ESMTP mail relay.
–
Domain Name—Specifies a local domain.
Action—Drop connection or log.
Log—Enable or disable.
Inspections—Tab that shows you the ESMTP inspection configuration and lets you add or edit.
Match Type—Shows the match type, which can be a positive or negative match.
–
Criterion—Shows the criterion of the ESMTP inspection.
–
Value—Shows the value to match in the ESMTP inspection.
–
Action—Shows the action if the match condition is met.
–
– Log—Shows the log state.
– Add—Opens the Add ESMTP Inspect dialog box to add an ESMTP inspection.
– Edit—Opens the Edit ESMTP Inspect dialog box to edit an ESMTP inspection.
– Delete—Deletes an ESMTP inspection.
Move Up—Moves an inspection up in the list.
–
Move Down—Moves an inspection down in the list.
–
Security Context
Transparent Single
• •
Chapter 37 Configuring Inspection of Basic Internet Protocols
Multiple
Context System
—
•
OL-20339-01