Cisco ASA 5505 Configuration Manual page 349

Chapter 17 Adding a StandardACL
Using Standard ACLs
Standard ACLs identify the destination IP addresses (not source addresses) of OSPF routes and can be
used in a route map for OSPF redistribution. Standard ACLs cannot be applied to interfaces to control
traffic.
This section includes the following topics:
•
•
•
Adding a Standard ACL
To add a standard ACL to your configuration, perform the following steps:
Choose Configuration > Firewall > Advanced > Standard ACL.
Step 1
Click Add, and from the drop-down list, choose Add ACL.
Step 2
In the Add ACL dialog box, add a name or number (without spaces) to identify the ACL.
Step 3
Click OK
Step 4
The ACL name appears in the main pane.
You may add additional ACLs.
Step 5 Click Apply to save the ACLs to your configuration.
You can now add one or more ACEs to the newly created ACL.
To add an ACE, see the
Adding an ACE to a Standard ACL
Before you can add an ACE to a configuration, you must first add an ACL. For information about adding
a standard ACL, see the
ACEs, see the
To add an ACE to an ACL that exists in your configuration, perform the following steps:
Choose Configuration > Firewall > Advanced > Standard ACL.
Step 1
In the main pane, select the ACL for which you want to add an ACE.
Step 2
Click Add, and choose Add ACE from the drop-down list.
Step 3
The Add ACE dialog box appears.
(Optional) To specify the placement of the new ACE, select an existing ACE, and click Insert... to add
Step 4
the ACE before the selected ACE, or click Insert After... to add the ACE after the selected ACE.
Click one of the following radio buttons to choose an action:
Step 5
•
•
OL-20339-01
Adding a Standard ACL, page 17-3
Adding an ACE to a Standard ACL, page 17-3
Editing an ACE in a Standard ACL, page 17-4
"Adding an ACE to a Standard ACL" section on page
"Adding a Standard ACL" section on page
"Editing an ACE in a Standard ACL" section on page 17-4
Permit—Permits access if the conditions are matched.
Deny—Denies access if the conditions are matched.
17-3. For information about editing
Cisco ASA 5500 Series Configuration Guide using ASDM
Adding Standard ACLs
17-3.
17-3