Cisco ASA 5505 Configuration Manual page 545

Chapter 27 Configuring Network Object NAT
Figure 27-38
Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
c.
Figure 27-39
Step 5 Configure the real and mapped interfaces by clicking Advanced:
Figure 27-40
Click OK to return to the Edit Network Object dialog box, click then click OK again to return to the
Step 6
NAT Rules table.
Create a network object for the outside web server:
Step 7
OL-20339-01
Defining the NAT Pool Addresses
Choosing the New Network Object
Configuring Interfaces
Configuration Examples for Network Object NAT
Cisco ASA 5500 Series Configuration Guide using ASDM
27-23