Cisco ASA 5505 Configuration Manual page 804

FTP Inspection
Firewall Mode
Routed
•
Add/Edit FTP Policy Map (Security Level)
The Add/Edit FTP Policy Map dialog box is accessible as follows:
Configuration > Global Objects > Inspect Maps > FTP > FTP Inspect Map > Basic View
The Add/Edit FTP Policy Map pane lets you configure the security level and additional settings for FTP
application inspection maps.
Fields
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add/Edit FTP Policy Map (Details)
The Add/Edit FTP Policy Map (Details) dialog box is accessible as follows:
Configuration > Global Objects > Inspect Maps > FTP > FTP Inspect Map > Advanced View
Cisco ASA 5500 Series Configuration Guide using ASDM
37-20
Security Context
Transparent Single
• •
Name—When adding an FTP map, enter the name of the FTP map. When editing an FTP map, the
name of the previously configured FTP map is shown.
Description—Enter the description of the FTP map, up to 200 characters in length.
Security Level—Select the security level (medium or low).
– Low
Mask Banner Disabled
Mask Reply Disabled
Medium—Default.
–
Mask Banner Enabled
Mask Reply Enabled
File Type Filtering—Opens the Type Filtering dialog box to configure file type filters.
–
Default Level—Sets the security level back to the default level of Medium.
–
Details—Shows the Parameters and Inspections tabs to configure additional settings.
Security Context
Transparent Single
• •
Chapter 37 Configuring Inspection of Basic Internet Protocols
Multiple
Context System
• —
Multiple
Context System
—
•
OL-20339-01