Cisco ASA 5505 Configuration Manual page 1047

Configuring Connection Settings
This chapter describes how to configure connection settings for connections that go through the adaptive
security appliance, or for management connections, that go to the adaptive security appliance.
Connection settings include:
•
•
•
•
•
•
•
This chapter includes the following sections:
•
•
•
•
•
•
Information About Connection Settings
This section describes why you might want to limit connections and includes the following topics:
•
•
•
•
•
•
OL-20339-01
Maximum connections (TCP and UDP connections, embryonic connections, per-client connections)
Connection timeouts
Dead connection detection
TCP sequence randomization
TCP normalization customization
TCP state bypass
Global timeouts
Information About Connection Settings, page 48-1
Licensing Requirements for Connection Settings, page 48-4
Guidelines and Limitations, page 48-4
Default Settings, page 48-5
Configuring Connection Settings, page 48-5
Feature History for Connection Settings, page 48-11
TCP Intercept and Limiting Embryonic Connections, page 48-2
Disabling TCP Intercept for Management Packets for Clientless SSL Compatibility, page 48-2
Dead Connection Detection (DCD), page 48-2
TCP Sequence Randomization, page 48-2
TCP Normalization, page 48-3
TCP State Bypass, page 48-3
C H A P T E R
Cisco ASA 5500 Series Configuration Guide using ASDM
48
48-1