Cisco ASA 5505 Configuration Manual page 73

Chapter 1 Introduction to the Cisco ASA 5500 Series Adaptive Security Appliance
Table 1-4 New Features for ASDM Version 6.3(1)/ASA Version 8.3(1) (Unless Otherwise Noted) (continued)
Feature
Unified Communication
Wizard
Enhanced Navigation for
Unified Communication
Features
Routing Features
Route map support
Monitoring Features
Time Stamps for Access List
Hit Counts
High Performance
Monitoring for ASDM
Licensing Features
Non-identical failover
licenses
OL-20339-01
Description
The Unified Communications wizard guides you through the complete configuration and
automatically configures required aspects for the following proxies: Cisco Mobility Advantage
Proxy, Cisco Presence Federation Proxy, Cisco Intercompany Media Engine proxy.
Additionally, the Unified Communications wizard automatically configures other required
aspects of the proxies.
The following screens were modified:
Wizards > Unified Communications Wizard
Configuration > Firewall > Unified Communications
The Unified Communications proxy features, such as the Phone Proxy, TLS Proxy, CTL File,
and CTL Provider pages, are moved from under the Objects category in the left Navigation
panel. to the new Unified Communications category. In addition, this new category contains
pages for the new Unified Communications wizard and the UC-IME Proxy page.
This feature interoperates with all ASA versions.
ASDM has added enhanced support for static and dynamic routes.
The following screen was modified: Configuration > Device Setup > Routing > Route Maps.
This feature interoperates with all ASA versions.
Displays the timestamp, along with the hash value and hit count, for a specified access list.
The following screen was modified: Configuration > Firewall > Access Rules. (The timestamp
appears when you hover the mouse over a cell in the Hits column.)
You can now enable high performance monitoring for ASDM to show the top 200 hosts
connected through the adaptive security appliance. Each entry of a host contains the IP address
of the host and the number of connections initiated by the host, and is updated every 120
seconds.
The following screen was introduced: Home > Firewall Dashboard > Top 200 Hosts.
Failover licenses no longer need to be identical on each unit. The license used for both units is
the combined license from the primary and secondary units.
For the ASA 5505 and 5510 adaptive security appliances, both units require the
Note
Security Plus license; the Base license does not support failover, so you cannot enable
failover on a standby unit that only has the Base license.
The following screen was modified: Configuration > Device Management > Licensing >
Activation Key.
Cisco ASA 5500 Series Configuration Guide using ASDM
New Features
1-11