Cisco ASA 5505 Configuration Manual page 275

Chapter 9 Configuring Basic Settings
Setting the Date and Time Manually
The Configuration > Device Setup > System Time > Clock pane lets you manually set the date and time
for the adaptive security appliance. The time displays in the status bar at the bottom of the main ASDM
pane.
In multiple context mode, you can set the time in the system configuration only.
To dynamically set the time using an NTP server, see the
time derived from an NTP server overrides any time set manually in the Clock pane.
Fields
•
•
•
•
Configuring HTTP Redirect
The HTTP Redirect table displays each interface on the adaptive security appliance, shows whether it is
configured to redirect HTTP connections to HTTPS, and the port number from which it redirects those
connections.
To redirect HTTP, the interface requires an access list that permits HTTP. Otherwise, the interface cannot
Note
listen to the HTTP port.
OL-20339-01
Time Zone—Sets the time zone as GMT plus or minus the appropriate number of hours. If you select
the Eastern Time, Central Time, Mountain Time, or Pacific Time zone, then the time adjusts
automatically for daylight savings time, from 2:00 a.m. on the second Sunday in March to 2:00 a.m.
on the first Sunday in November.
Note Changing the time zone on the adaptive security appliance may drop the connection to
intelligent SSMs.
Date—Sets the date. Click the Date drop-down list to display a calendar. Then navigate to the correct
date using the following methods:
Click the name of the month to display a list of months. Click the desired month. The calendar
–
updates to that month.
Click the year to change the year. You can use the up and down arrows to scroll through the
–
years, or you can type a year in the entry field.
Click the arrows to the right and left of the month and year display to scroll the calendar forward
–
and backwards one month at a time.
Click a day on the calendar to set the date.
–
Time—Sets the time on a 24-hour clock.
hh, mm, and ss boxes—Sets the hour, minutes, and seconds.
–
Update Display Time—Updates the time shown in the bottom right corner of the ASDM pane. The
current time updates automatically every ten seconds.
Configuring the Master Passphrase
Cisco ASA 5500 Series Configuration Guide using ASDM
Configuring HTTP Redirect
pane;
9-5