Cisco ASA 5505 Configuration Manual page 938

Configuring the UC-IME by using the Unified Communication Wizard
Click Next.
Step 4
The wizard completes by displaying a summary of the configuration created for the Presence Federation
proxy.
Configuring the UC-IME by using the Unified Communication
Wizard
The Unified Communication Wizard is supported for the adaptive security appliance version 8.3(1) and
Note
later.
To configure the Cisco Intercompany Media Engine Proxy by using ASDM, choose Wizards > Unified
Communication Wizard from the menu. The Unified Communication Wizard opens. From the first
page, select the Cisco Intercompany Media Engine Proxy option under the Business-to-Business section
and click Next.
Note The Cisco Intercompany Media Engine Proxy does not appear as an option in the Unified
Communication Wizard unless the license required for this proxy is installed on the adaptive security
appliance.
When using the wizard to create the Cisco Intercompany Media Engine Proxy, ASDM automatically
creates the necessary TLS proxies, enables SIP inspection for Cisco Intercompany Media Engine traffic,
generates address translation (static PAT) statements for local Cisco Unified Communications Manager
servers, and creates access lists to allow traffic between the local Cisco Unified Communications
Manager servers and the remote servers.
The following steps provide the high-level overview for configuring the Cisco Intercompany Media
Engine Proxy:
Select the topology of the Cisco Intercompany Media Engine Proxy, namely whether the security
Step 1
appliance is an edge firewall with all Internet traffic flowing through it or whether the security appliance
is off the path of the main Internet traffic (referred to as an off-path deployment). See
Topology for the Cisco Intercompany Media Engine Proxy, page
Step 2 Specify private network settings such as the Cisco UCM IP addresses and the ticket settings. See
Configuring the Private Network Settings for the Cisco Intercompany Media Engine Proxy, page
Specify the public network settings. See
Step 3
Intercompany Media Engine Proxy, page
Specify the media termination address settings of the Cisco UMC. See
Step 4
Termination Address for the Cisco Intercompany Media Engine Proxy, page
Configure the local-side certificate management, namely the certificates that are exchanged between the
Step 5
local Cisco Unified Communications Manager servers and the security appliance. See
Local-Side Certificates for the Cisco Intercompany Media Engine Proxy, page
Cisco ASA 5500 Series Configuration Guide using ASDM
42-10
Chapter 42 Using the Cisco Unified Communication Wizard
42-11.
Configuring the Public Network Settings for the Cisco
42-13.
Configuring the
42-12.
Configuring the Media
42-14.
Configuring the
42-15.
OL-20339-01