Cisco ASA 5505 Configuration Manual page 894

Sun RPC Inspection
•
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add/Edit SUNRPC Service
The Configuration > Firewall > Advanced > SUNRPC Server > Add/Edit SUNRPC Service dialog box
lets you specify what SunRPC services are allowed to traverse the adaptive security appliance and their
specific timeout, on a per-server basis.
Fields
•
•
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Cisco ASA 5500 Series Configuration Guide using ASDM
39-4
IP address—Displays the IP address of the SunRPC server.
Mask—Displays the subnet mask of the IP Address of the SunRPC server.
Service ID—Displays the SunRPC program number, or service ID, allowed to traverse the adaptive
security appliance.
Protocol—Displays the SunRPC transport protocol (TCP or UDP).
Port—Displays the SunRPC protocol port range.
Timeout—Displays the idle time after which the access for the SunRPC service traffic is closed.
Security Context
Transparent Single
• •
Interface Name—Specifies the interface on which the SunRPC server resides.
Protocol—Specifies the SunRPC transport protocol (TCP or UDP).
IP address—Specifies the IP address of the SunRPC server.
Port—Specifies the SunRPC protocol port range.
Mask—Specifies the subnet mask of the IP Address of the SunRPC server.
Timeout—Specifies the idle time after which the access for the SunRPC service traffic is closed.
Format is HH:MM:SS.
Service ID—Specifies the SunRPC program number, or service ID, allowed to traverse the adaptive
security appliance.
Security Context
Transparent Single
• •
Chapter 39 Configuring Inspection of Database and Directory Protocols
Multiple
Context System
—
•
Multiple
Context System
—
•
OL-20339-01