Cisco ASA 5505 Configuration Manual page 1026

Configuring Cisco Intercompany Media Engine Proxy
Command
Step 3
hostname(config-uc-ime)# ucm address ip_address
trunk-security-mode [nonsecure | secure]
Example:
hostname(config-uc-ime)# ucm address 192.168.10.30
trunk-security-mode non-secure
Cisco ASA 5500 Series Configuration Guide using ASDM
47-20
Chapter 47 Configuring Cisco Intercompany Media Engine Proxy
Purpose
Specifies the Cisco UCM server in the enterprise.
You must specify the real IP address of the Cisco
UCM server. Do not specify a mapped IP address for
the server.
You must include an entry for each Cisco
Note
UCM in the cluster with Cisco Intercompany
Media Engine that has a SIP trunk enabled.
Where the nonsecure and secure options specify the
security mode of the Cisco UCM or cluster of Cisco
UCMs.
Specifying secure for Cisco UCM or Cisco
Note
UCM cluster indicates that Cisco UCM or
Cisco UCM cluster is initiating TLS;
therefore, you must configure TLS for
components. See (Optional) Configuring
TLS within the Local Enterprise,
page 47-28.
You can specify the secure option in this task or you
can update it later while configuring TLS for the
enterprise. See Step 11 in
TLS within the Local Enterprise, page
(Optional) Configuring
47-28.
OL-20339-01