Startup Wizard Screens For Asa 5500 Series Adaptive Security Appliances; Startup Wizard Screens For The Asa 5505 Adaptive Security Appliance - Cisco ASA 5505 Configuration Manual

Asa 5500 series

Hide thumbs Also See for ASA 5505:

Getting started manual (168 pages)

Administrator's manual (118 pages)

Hardware installation manual (82 pages)

Table of Contents

Using the Startup Wizard

Startup Wizard Screens for ASA 5500 Series Adaptive Security

security appliances and IPS, if you have an AIP SSM installed. The actual sequence of screens is

determined by your specified configuration selections. The Availability columns lists the mode or modes

in which each screen appears and provides additional configuration information. Click the name to view

information for the selected screen.

Step 1 - Starting Point or Welcome, page 7-4

Step 2 - Basic Configuration, page 7-5

Step 3 - Time Zone and Clock Configuration,

Step 4 - Auto Update Server, page 7-6

Step 5 - Management IP Address Configuration,

Outside Interface Configuration, page 7-28

Outside Interface Configuration - PPPoE,

Interface Configuration, page 7-27

Other Interfaces Configuration, page 7-16

Step 13 - Static Routes, page 7-11

Step 14 - DHCP Server, page 7-11

Step 15 - Address Translation (NAT/PAT),

Step 16 - Administrative Access, page 7-13

Step 18 - Startup Wizard Summary, page 7-16

Startup Wizard Screens for the ASA 5505 Adaptive Security

security appliance and IPS, if you have an AIP SSC installed. The sequence of screens listed represents

configuration for the single, routed mode. The Availability columns lists the mode or modes in which

each screen appears and provides additional configuration information. Click the name to view

information for the selected screen.

lists all of the required Startup Wizard screens for configuring the ASA 5500 series adaptive