Configuring Neighbor Solicitation Messages
Feature History for the Neighbor Solicitation Message Interval
Table 25-2
Table 25-2
Feature History for Neighbor Solicitation Message Interval
Feature Name
Neighbor solicitation message interval
Configuring the Neighbor Reachable Time
This section includes the following topics:
•
•
•
•
•
•
Information About Neighbor Reachable Time
The neighbor reachable time enables detecting unavailable neighbors. Shorter configured times enable
detecting unavailable neighbors more quickly, however, shorter times consume more IPv6 network
bandwidth and processing resources in all IPv6 network devices. Very short configured times are not
recommended in normal IPv6 operation.
Licensing Requirements for Neighbor Reachable Time
The following table shows the licensing requirements for this feature:
Model
License Requirement
All models
Base License.
Guidelines and Limitations for Neighbor Reachable Time
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
Supported in single and multiple context mode.
Firewall Mode Guidelines
Supported in routed mode only. Transparent mode is not supported.
Cisco ASA 5500 Series Configuration Guide using ASDM
25-4
lists the release history for this feature.
Releases
7.0(1)
Information About Neighbor Reachable Time, page 25-4
Licensing Requirements for Neighbor Reachable Time, page 25-4
Guidelines and Limitations for Neighbor Reachable Time, page 25-4
Default Settings for the Neighbor Reachable Time, page 25-5
Configuring Neighbor Reachable Time, page 25-5
Feature History for Neighbor Reachable Time, page 25-8
Chapter 25
Feature Information
The feature was introduced.
The ipv6 nd ns-interval command was introduced.
Configuring IPv6 Neighbor Discovery
OL-20339-01