Cisco ASA 5505 Configuration Manual page 1043

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

Chapter 47
Configuring Cisco Intercompany Media Engine Proxy
Media-session: 192.168.10.3/30930 :: client ip 10.194.108.119/29824
Call ID: N/A
Lcl RTP conn 192.168.10.3/30930 to 192.168.10.51/19520 tx_pkts 20201 rx_pkts 20203
show uc-ime fallback-notification statistics
Displays statistics about the PSTN fallback notifications to the Cisco UMC. Even if a call is sent over
VoIP because the quality of the connection was good, the connection quality might worsen mid-call. To
ensure an overall good experience for the end user, Cisco Intercompany Media Engine attempts to
perform a mid-call fallback. Performing a mid-call fallback requires the adaptive security appliance to
monitor the RTP packets coming from the Internet. If fallback is required, the adaptive security
appliance sends a REFER message to Cisco UCM to tell it that it needs to fallback the call to PSTN.
Cisco Intercompany Media Engine uses a configurable hold-down timer to set the amount of time that
adaptive security appliance waits before notifying Cisco UCM whether to fall back to PSTN.
hostname# show uc-ime fallback-notification statistics
UCM address: 172.23.32.37
Total Notifications Sent: 10
show uc-ime mapping-service-sessions
When the Cisco Intercompany Media Engine Proxy is configured for an off path deployment, displays
mapping-service requests and replies between the proxy and the local Cisco UMC. A TCP port on the
adaptive security appliance is configured to listen for mapping requests.
The port number must be 1024 or higher to avoid conflicts with other services on the device, such as
Telnet or SSH. By default, the port number is TCP 8060.
Hostname# show uc-b2blink mapping-service-sessions
Total active sessions:
Session client (IP:Port)
192.168.1.10:2001
192.168.1.20:3001
show uc-ime mapping-service-sessions statistics
Displays statistical information about the Cisco Intercompany Media Engine Proxy mapping service
used in off path signaling.
Hostname# show uc-ime mapping-service-sessions statistics
Total active sessions:
Session client
(IP:Port)
192.168.1.10:2001
192.168.1.20:3001
OL-20339-01
Max_ITE_count_in_8_sec
Max_BLS_ms
Max_PDV_usec
Min_PDV_usec
Mov_avg_PDV_usec
Total_ITE_count
Total_sec_count
Concealed_sec_count
Severely_concealed_sec_count
Max_call_interval_ms
Total_SequenceNumber_Resets
2
2
Total
requests
10
19
Configuring Cisco Intercompany Media Engine Proxy
:
0
:
0
:
1000
:
0
:
109
:
0
:
403
:
0
:
0
:
118
:
0
Idle time
0:01:01
0:10:20
Responses
Failed
sent
requests
9
1
19
0
Cisco ASA 5500 Series Configuration Guide using ASDM
Pending
Idle
responses
time
0
0:01:01
0
0:10:20
47-37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5540Asa 5520Asa 5550Asa 5580

Table of Contents