Cisco ASA 5505 Configuration Manual page 584

Configuration Examples for Twice NAT
Figure 28-44
By default, the NAT rule is added to the end of section 1. If you want to add a NAT rule to section 3,
after the network object NAT rules, choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.
Figure 28-45
Set the source and destination interfaces:
Step 10
Figure 28-46
Step 11 For the Original Source Address, type the name of the inside network object (myInsideNetwork) or click
the browse button
For the Original Destination Address, click the browse button
Step 12
network 2 in the Browse Original Destination Address dialog box.
Add the new network object.
a.
Cisco ASA 5500 Series Configuration Guide using ASDM
28-24
Adding a NAT Rule
Add NAT Rule Dialog Box
Setting the Interfaces
to choose it.
Chapter 28 Configuring Twice NAT
to add a new network object for DMZ
OL-20339-01