Cisco ASA 5505 Configuration Manual page 909

Chapter 40 Configuring Inspection for Management Application Protocols
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
RADIUS Inspect Map Host
The RADIUS Inspect Map Host Parameters pane lets you configure the host parameter settings for the
inspect map.
Fields
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
RADIUS Inspect Map Other
The RADIUS Inspect Map Other Parameters pane lets you configure additional parameter settings for
the inspect map.
OL-20339-01
RADIUS Inspect Maps—Table that lists the defined RADIUS inspect maps. The defined inspect
maps are also listed in the RADIUS area of the Inspect Maps tree.
Add—Adds the new RADIUS inspect map to the defined list in the RADIUS Inspect Maps table and
to the RADIUS area of the Inspect Maps tree. To configure the new RADIUS map, select the
RADIUS entry in Inspect Maps tree.
Delete—Deletes the application inspection map selected in the RADIUS Inspect Maps table and
from the RADIUS area of the Inspect Maps tree.
Security Context
Transparent Single
• •
Name—Shows the name of the previously configured RADIUS accounting map.
Description—Enter the description of the RADIUS accounting map, up to 200 characters in length.
Host Parameters—Lets you configure host parameters.
Host IP Address—Specify the IP address of the host that is sending the RADIUS messages.
–
– Key: (optional)—Specify the key.
Add—Adds the host entry to the Host table.
Delete—Deletes the host entry from the Host table.
Security Context
Transparent Single
• •
Multiple
Context System
—
•
Multiple
Context System
—
•
Cisco ASA 5500 Series Configuration Guide using ASDM
RADIUS Accounting Inspection
40-15