Oracle SPARC T5-4 Service Manual page 81

8. Place the cover onto the processor module and slide the cover forward until the
latch clicks into place.
9. Consider your next steps.
If you are adding a second processor module to the server, return to
■
Upgrade Process" on page
■ If you are replacing a processor module after installing replacement DIMMs,
proceed to
10. Finish the installation procedure.
See:
Install the processor module.
■
See "Install a Processor Module or Processor Filler Module" on page
Return the server to operation.
■
See "Returning the Server to Operation" on page
Verify DIMM functionality.
■
See "Verify a DIMM" on page
Related Information
"DIMM Population Rules" on page 69
■
"DIMM Addresses" on page 70
■
"DIMM Rank Classification" on page 72
■
"Remove a DIMM or DIMM Filler Panel" on page 77
■
"Verify a DIMM" on page 82
■
"DIMM Fault Handling" on page 73
■
57.
Step 10.
82.
64.
191.
Servicing DIMMs
Install a DIMM
"Server
81