Oracle SPARC T5-4 Service Manual page 159

If you are removing a PCIe card carrier from a server that is running (that is, if you are hot-
■
plugging the PCIe card), go to
If you are removing a PCIe card carrier from a powered-down server, go to
■
4. Bring the PCIe card offline. Do one of the following:
Press the ATTN button to take the card offline. The Power OK LED should go
■
off, indicating that the card is ready to be removed. Go to
■
Use the hotplug command to bring the card offline:
a.
hotplug list -cv
#
Connection State
______________________________________________________________________________
PCIE1 EMPTY
...
PCIE7 ENABLED
Device
___________________________________________________________________________
SUNW,qlc@0
fp
disk
fp@0,0
SUNW,qlc@0,1
fp
disk
fp@0,0
PCIE13 EMPTY
PCIE15 EMPTY
b.
c.
List all devices in the device tree, including PCIe cards:
hotplug list -cv
#
This command lists dynamically reconfigurable hardware resources and shows
their operational status. In this case, look for the status of the PCIe card you plan to
remove. This information is listed in the State column.
For example:
Description
PCIe-Native
PCIe-Native
Usage
-
-
-
-
-
-
-
-
PCIe-Native
PCIe-Native
Bring the PCIe card offline.
For example:
hotplug disable PCIE7
#
Verify that the PCIe card status is PRESENT.
Step 4.
Remove a PCIe Card Carrier
Step 5.
Step 5.
Servicing PCIe Cards 159