Oracle SPARC T5-4 Service Manual page 78

Remove a DIMM or DIMM Filler Panel
4. Push down on the ejector tabs on each side of the DIMM until the DIMM is
released.
Caution -
Grasp the top corners of the faulty DIMM and lift it out of its slot.
5.
Place the DIMM on an antistatic mat.
6.
7. Repeat
intend to remove.
Determine your next step:
8.
■ If you are installing replacement DIMMs at this time, go to
DIMM" on page
■ If you are not installing replacement DIMMs at this time, go to
9. Finish the installation procedure.
See:
Install the processor module.
■
See
Return the server to operation.
■
See
Verify DIMM functionality.
■
See
78 SPARC T5-4 Server Service Manual • July 2016
DIMMs and heat sinks on the motherboard might be hot.
Step 4 through Step 6
79.
"Install a Processor Module or Processor Filler Module" on page
"Returning the Server to Operation" on page
"Verify a DIMM" on page
for any other DIMMs or DIMM filler panels you
191.
82.
"Install a
Step 9.
64.