Oracle SPARC T5-4 Service Manual page 36

Configure POST
This example sets the virtual keyswitch to normal, which configures POST to run according to
other parameter values.
set /HOST keyswitch_state=normal
->
Set ???keyswitch_state' to ???Normal'
For possible values for the keyswitch_state parameter, see
Affect POST Behavior" on page
3.
If the virtual keyswitch is set to normal, and you want to define the mode, level,
verbosity, or trigger, set the respective parameters.
Syntax:
set /HOST/diag property=value
See "Oracle ILOM Properties That Affect POST Behavior" on page 33
parameters and values.
Examples:
-> set /HOST/diag mode=normal
set /HOST/diag verbosity=max
->
View the current values for settings.
4.
Example:
-> show /HOST/diag
/HOST/diag
Targets:
Properties:
error_reset_level = max
error_reset_verbosity = normal
hw_change_level = max
hw_change_verbosity = normal
level = min
mode = normal
power_on_level = max
power_on_verbosity = normal
trigger = hw_change error-reset
verbosity = normal
Commands:
->
36 SPARC T5-4 Server Service Manual • July 2016
cd
set
show
33.
"Oracle ILOM Properties That
for a list of