Verify The Rear Chassis Subassembly - Oracle SPARC T5-4 Service Manual

Verify the Rear Chassis Subassembly

All PCIe carriers or filler panels – see
■
you are installing the PCIe cards back in their original slots using the notes that you took
when removing the cards from the slots earlier.
Rear I/O module – see
■
Go to the front of the server and install the following components:
5.
Both processor modules – see
■
Module" on page
Main module – see
■
Both power supplies – see
■
6. Connect the power cords.
See "Connect Power Cords" on page 191
7. Power on the server.
See "Returning the Server to Operation" on page
8. Verify the rear chassis subassembly.
See "Verify the Rear Chassis Subassembly" on page
Related Information
"Remove the Rear Chassis Subassembly" on page 184
■
"Returning the Server to Operation" on page 191
■
Verify the Rear Chassis Subassembly
Ensure that you have completed the following:
1.
Applied power to the server.
■
See
Started the system.
■
See
2. Log in to Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
3. Start the faultmagmt shell.
start SP/faultmgmt/shell
->
Are you sure you want to start the faultmgmt shell (y/n)?
188 SPARC T5-4 Server Service Manual • July 2016
"Install the Rear I/O Module" on page
64.
"Install the Main Module" on page
"Install a Power Supply" on page
"Connect Power Cords" on page
"Power On the Server (Oracle ILOM)" on page
"Install a PCIe Card Carrier" on page
"Install a Processor Module or Processor Filler
191.
188.
191.
192.
26.
168. Verify that
178.
102.
140.
y