Servicing The Rear I/O Module; Rear I/O Module Leds - Oracle SPARC T5-4 Service Manual

Servicing the Rear I/O Module

Caution -
discharge. This discharge can cause failure of server components.
Caution -
"Disconnect Power Cords" on page
These topics describe service procedures for the rear I/O module in the server.
"Rear I/O Module LEDs" on page 173
■
"Determine if the Rear I/O Module Is Faulty" on page 175
■
"Remove the Rear I/O Module" on page 176
■
"Install the Rear I/O Module" on page 178
■
"Verify the Rear I/O Module" on page 180
■

Rear I/O Module LEDs

The LEDs on the rear I/O module give server status information and link information on the
NET ports.
This procedure requires that you handle components that are sensitive to electrostatic
You must disconnect the power cords before servicing this component. See
53.
Servicing the Rear I/O Module 173