Remove The Service Processor Card - Oracle SPARC T5-4 Service Manual

Remove the Service Processor Card

Related Information
"Remove the Service Processor Card" on page 116
■
"Install the Service Processor Card" on page 118
■
"Verify the Service Processor Card" on page 120
■
Remove the Service Processor Card
The service processor card is a cold-service component that can be replaced by a customer.
Caution -
discharge. This discharge can cause failure of server components.
1. Back up the SP configuration information before removing the service processor
card.
At the Oracle ILOM prompt, type:
cd /SP/config
->
dump -destination uri target
->
where:
The acceptable values for uri are:
■
■
■
■
■
■
■
■ target is the remote location where you want to store the configuration
information.
For example:
dump -destination tftp://129.99.99.99/pathname
->
116 SPARC T5-4 Server Service Manual • July 2016
This procedure requires that you handle components that are sensitive to electrostatic
tftp
ftp
sftp
scp
http
https