Oracle SPARC T5-4 Service Manual page 160

Remove a PCIe Card Carrier
hotplug list -cv PCIE7
#
Connection State
______________________________________________________________________________
PCIE7 PRESENT
d.
■
Use the cfgadm command to bring the card offline:
a.
Ap_id Type
PCI-EM0 sas/hp connected configured ok
PCI-EM1 sas/hp connected configured ok
...
b.
c.
5. Disconnect any cables connected to the PCIe card.
Label the cables to ensure proper connection to the replacement PCIe card.
Tip -
160 SPARC T5-4 Server Service Manual • July 2016
For example:
Description
PCIe-Native
Verify that the card's green Power OK LED is off.
Use the cfgadm -al command to list all devices in the device tree,
including PCIe cards:
# cfgadm -al
This command lists dynamically reconfigurable hardware resources and shows
their operational status. In this case, look for the status of the PCIe card you plan to
remove. This information is listed in the Occupant column.
For example:
Receptacle
Take the PCIe card offline:
cfgadm -c disconnect Ap-id
#
where Ap-id is the ID of the card that you want to remove.
Verify that the card's green Power OK LED is off.
Occupant Condition