Returning The Server To Operation; Connect Power Cords - Oracle SPARC T5-4 Service Manual

Returning the Server to Operation

These topics explain how to return the Oracle SPARC T5-4 server to operation after you have
performed service procedures.
Steps Description
1. Connect the power cords.
2. Power on the server.
3. Continue the service operation you were
performing (if applicable).
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 23
■
"Preparing for Service" on page 45
■
"Configuring Boot and Restart Behavior" in SPARC and Netra SPARC T5 Series Servers
■
Administration Guide
Oracle ILOM Documentation Library (http://www.oracle.com/goto/ILOM/docs)
■

Connect Power Cords

Standby power is applied as soon as the power cords are connected. Depending on how
Note -
the firmware is configured, the server might boot automatically.
Locate the AC connectors on the rear of the server.
1.
See "Rear Panel Components" on page
2. Connect the power cords to the AC connectors.
Related Information
"Power On the Server (Oracle ILOM)" on page 192
■
Links
"Connect Power Cords" on page 191
"Power On the Server (Oracle ILOM)" on page 192
"Component Service Categories" on page 48
15.
Returning the Server to Operation 191