Servicing The Main Module - Oracle SPARC T5-4 Service Manual

Servicing the Main Module

For the location of the main module, see
Caution -
discharge. This discharge can cause failure of server components.
Caution -
"Disconnect Power Cords" on page
Step Description
1 Determine if the main module is faulty.
2 Prepare the server for service.
3 Remove the main module.
4 Service main module components.
5 Install the main module.
6 Return the server to operation.
This procedure requires that you handle components that are sensitive to electrostatic
You must disconnect the power cords before servicing this component. See
"Front Panel Components" on page
53.
Link
"Main Module LEDs" on page 98
"Preparing for Service" on page 45
"Remove the Main Module" on page 99
■ "Servicing the Storage Backplanes" on page 107
■ "Servicing the Service Processor Card" on page 115
■ "Servicing the System Configuration PROM" on page 121
■ "Servicing the System Battery" on page 125
■ "Servicing the Front I/O Assembly" on page 131
■ "Install the Main Module" on page 102
■ "Verify the Main Module" on page 105
"Returning the Server to Operation" on page 191
14.
Servicing the Main Module 97