Oracle SPARC T5-4 Service Manual page 132

Remove the Front I/O Assembly
1. Remove the main module from the server.
See "Remove the Main Module" on page
2. Take the necessary ESD precautions.
See "Prevent ESD Damage" on page
Locate the front I/O assembly on the main module.
3.
See "Main Module Components" on page
4. Disconnect the ribbon cable that connects the assembly to the motherboard and
remove the front I/O assembly.
a. Pull the cable free of the connector on the motherboard (panel 1).
b. Push the cable connector aside to access the captive screw that secures the
assembly to the motherboard (panel 2).
Loosen the screw to release the lower end of the assembly.
132 SPARC T5-4 Server Service Manual • July 2016
99.
54.
19.