Install A Fan Module - Oracle SPARC T5-4 Service Manual

Install a Fan Module

The fan module is a hot-service component that can be replaced by a customer.
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause failure of server components.
Insert the fan module into the empty fan module slot.
1.
The fan snaps into position with an audible click.
2. Power on the server, if necessary.
If you had to power off the server before removing and installing a new fan module, see
"Returning the Server to Operation" on page 191
3. Verify the fan module functionality.
See "Verify a Fan Module" on page
Related Information
"Determine Which Fan Module Is Faulty" on page 146
■
"Remove a Fan Module" on page 147
■
"Verify a Fan Module" on page 150
■
to power on the server again.
150.
Install a Fan Module
Servicing Fan Modules 149