Power On The Server (Oracle Ilom) - Oracle SPARC T5-4 Service Manual

Power On the Server (Oracle ILOM)

Power On the Server (Oracle ILOM)
Note -
ILOM policy settings. You must determine if the server is running before you issue the
start /System command.
1. Check the server power state. Type:
show /System power_state
->
/System
Properties:
If the server is powered off, power on the server. Type:
2.
-> start /System
Starting /System
3. (Optional.) To view server boot output, start a host console stream. Type:
start /HOST/console
->
4. If you are adding a second processor module, return to
Process" on page
Related Information
"Connect Power Cords" on page 191
■
192 SPARC T5-4 Server Service Manual • July 2016
The boot process depends on the most recent power state of the server and on Oracle
power_state = Off
57.
"Server Upgrade