Install A Power Supply - Oracle SPARC T5-4 Service Manual

Install a Power Supply

5. Pull the power supply out of the server.
6. Install the replacement power supply.
See "Install a Power Supply" on page
Related Information
"Power Supply and AC Power Connectors" on page 135
■
"Power Supply and AC Power Connector LEDs" on page 137
■
"Determine Which Power Supply Is Faulty" on page 138
■
"Install a Power Supply" on page 140
■
"Verify a Power Supply" on page 143
■
Install a Power Supply
The power supply is a hot-service component that can be replaced by a customer.
Caution -
discharge. This discharge can cause failure of server components.
1. Open the latch on the replacement power supply, and align the power supply
with the empty bay.
140 SPARC T5-4 Server Service Manual • July 2016
This procedure requires that you handle components that are sensitive to electrostatic
140.