Pwbs; Detaching And Refitting The Engine Pwb - Kyocera Mita KM-2560 Service Manual

1-5-8

PWBs

(1) Detaching and refitting the engine PWB

Follow the procedure below to replace the engine PWB.
Procedure
1. Remove eleven screws and remove the rear
cover.
2. Remove three screws.
3. Remove the claw.
4. Remove the connector.
5. Remove the high voltage PWB.
Screws
(eleven)
Rear cover
Figure 1-5-100
Connector
Screw
High voltage
PWB
Screw
Screw
Figure 1-5-101
2H0/2HZ-1
Claw
1-5-55