Example For Poe Configurations; Network Requirements; Configuring Scheme; Using The Gui - TP-Link T1500-28PCT User Manual

Hide thumbs Also See for T1500-28PCT:

Table of Contents

Managing System

Example for PoE Configurations

The network topology of a company is shown as below. Camera1 and Camera2 work for

the security of the company and cannot be power off all the time. AP1 and AP2 provide the

internet service and only work in the office time.

Figure 9-1 Network Topology

To implement this requirement, you can set a PoE time-range as the office time, for

example, from 08:30 to 18:00 on work days. Then apply the settings to port 1/0/3 and

1/0/4. Port 1/0/1 and port1/0/2 need to supply power all the time, so the time range

configurations can be left as the default settings here.

The configurations of port 1/0/4 is similar with the configurations of port 1/0/3. Here we

take port 1/0/3 for example.

1) Choose the menu SYSTEM > Time Range > Time Range Create and click

load the following page.

Example for PoE Configurations

Configuration Guide