Ip Http Login Authentication; Ip Http Enable Authentication - TP-Link T1600-28TS Cli Reference Manual

34.21

ip http login authentication

Description
The ip http login authentication command is used to apply the login
authentication method list to users accessing through HTTP. To restore to
the default authentication method list, please use the no ip http login
authentication command.
Syntax
ip http login authentication {
no ip http login authentication
Parameter
method-list
"default" by default, which contains the method "local".
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the login authentication method list on the HTTP access as "list1":
T1600G-52TS(config)# ip http login authentication list1
34.22

ip http enable authentication

Description
The ip http enable authentication command is used to apply the privilege
authentication method list to users accessing through HTTP. To restore to
the default authentication method list, please use the no ip http enable
authentication command.
Syntax
ip http enable authentication {
no ip http enable authentication
method-list
—— Specify the login method list on the HTTP access. It is
method-list
342
}
}