Snmp-Server Traps Vlan - TP-Link T2700G-28TQ Cli Reference Manual

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
learn-mode-change —— Enable MAC address learn-mode-change trap. It is
sent when MAC address learning mode of the switch changes.
max-learned —— Enable MAC address max-learned trap. It is sent when the
amount of learned MAC address reaches the limit which is configured in port
security module.
Command Mode
Global Configuration Mode
Example
Enable all SNMP extended MAC address-related traps for the switch:
T2700G-28TQ(config)# snmp-server traps mac
Enable new MAC address trap only for the switch:
T2700G-28TQ(config)# snmp-server traps mac new

snmp-server traps vlan

Description
The snmp-server traps vlan command is used to enable SNMP extended
VLAN-related traps which include two types: create and delete. To disable this
function, please use no snmp-server traps vlan command.
Syntax
snmp-server traps vlan [ create | delete ]
no snmp-server traps vlan [create | delete ]
Parameter
create —— Enable VLAN-created trap. It is sent when new VLAN is created
successfully.
delete —— Enable VLAN-deleted traps. It is sent when VLAN is deleted
successfully.
Command Mode
Global Configuration Mode
Example
Enable all SNMP extended VLAN-related traps for the switch：
T2700G-28TQ(config)# snmp-server traps vlan
Enable VLAN-created trap only for the switch:
257