Ipv6 Mld Snooping Max-Group; Clear Ipv6 Mld Snooping Statistics - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (245 pages)
Table of Contents
Advertisement
Parameter
filter-list —— Specify the filter id list, in format of 1,3,10.
Command Mode
Interface Configuration Mode
Example
Specify the filter id as 1 and 10 on interface gigabitEthernet 1/0/2:
TL-SL5428E(config)# interface gigabitEthernet 1/0/2
TL-SL5428E(config-if)# ipv6 mld snooping filter-id 1,10
ipv6 mld snooping max-group
Description
The ipv6 mld snooping max-group command is used to specify the limit
number of groups for a port to join in. The default value is 256. To restore the
default value, please use no ipv6 mld snooping max-group command.
Syntax
ipv6 mld snooping max-group limit
no ipv6 mld snooping max-group
Parameter
limit —— Specify the max number of multicast groups on a port, ranging from 0
to 256.
Command Mode
Interface Configuration Mode
Example
Specify the limit group as 128 on interface gigabitEthernet 1/0/2:
TL-SL5428E(config)# interface gigabitEthernet 1/0/2
TL-SL5428E(config-if)# ipv6 mld snooping max-group 128
clear ipv6 mld snooping statistics
Description
The clear ipv6 mld snooping statistics command is used to clear the statistics
of the MLD packets.
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
261
Advertisement
Table of Contents
