Name; Switchport Mode - TP-Link TL-SG3210 Cli Reference Manual

Parameter
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Create VLAN Interface 2:
TL-SG3424(config)# interface vlan 2

name

Description
The name command is used to assign a description to a VLAN. To clear the
description, please use no name command.
Syntax
name descript
no name
Parameter
descript ——String to describe the VLAN, which contains 16 characters at most.
Command Mode
VLAN Configuration Mode（VLAN）
Example
Specify the name of VLAN 2 as "group1":
TL-SG3424(config)# vlan 2
TL-SG3424(config-vlan)# name group1

switchport mode

Description
The switchport mode command is used to configure the Link Type for the ports.
Syntax
switchport mode { access | trunk | general }
Parameter
access | trunk | general —— Link Types. There are three Link Types for the
ports.
26