Remote Diagnostics; Equipment Requirements - AGFA Avantra 36/44 Service Manual

3.4

Remote Diagnostics

This section describes the equipment requirements, modem configuration and pro-
cedures involved in making a remote connection to an Avantra.

3.4.1 Equipment Requirements

A remote connection to an Avantra requires the following equipment.
CAUTION:
If equipment used to make the remote connection is
other than that recommended, unpredictable results may occur.
Remote Site Equipment
Equipment
Dolch PC (or equivalent)
Modem: Zoom
Avantra Diagnostic Diskette (AVDIAG)
*
Modem and modem part numbers are subject to change.
** Refer to OMNI Bulletin Board for latest revision of AVDIAG.
Imagesetter Equipment
Equipment
Modem: Zoom
Power Cable (DEC to Modem)
9-Pin to 25-Pin Adapter cable
*Modem and modem part numbers, and power cables are subject to change.
Section I: Imagesetter
Part Number
78461-501
*
80007-001
**
700594-1003
Part Number
*
80007-001
208880-503
208881-501
Diagnostics 3-61