AGFA Avantra 36/44 Service Manual page 345

Avantra 36/44 Service Manual
23. Plug the wires into the buffer/imagesetter interface board at the four points
shown in Figure 1-16.
Figure 1-16 Attaching the buffer wires to the
–Buffer to Imagesetter harness opening. –Connector.
–Connector. –Connector.
NOTE:
See the Avantra 36/44 OLP Service Manual , for the OLP
attachment procedures and for attaching the anti-static
wire.
1-18 Installation
1
2
4
3
5
buffer/imagesetter interface board.
–Connector.
6
–Interface board.