AGFA Avantra 36/44 Service Manual page 135

Avantra 36/44 Service Manual
FLASHROM
The download files should reside in a common subdirectory such as Download.
Prog DSP/CORR
Prog OCP
Prog DEC K1
Prog Bridge
Get Blank ID
Save DSP Code
Save (CORR) Table
Exit
The Exit menu contains several modes for exiting the AVDIAG program.
Exit Modes
The following lists and explains the methods of exiting:
Exit
Soft Reset......Exit
Hard Reset.....Exit
DOS shell
3-48 Diagnostics
Set Real-Time Clock
Month
Date
Year
Hour
Minute
Programs the DEC FLASHROM. Prior to programming the
FLASHROM, the DEC DSP and the DEC CORR must be
saved.
Programs the OCP FLASHROM.
Programs the DEC K1 FLASHROM.
Programs the bridge FLASHROM.
List Blank FLASHROMS.
Saves the DSP code section of the FLASHROM.
Saves the DEC correction table's section of the FLASHROM.
Exits the program immediately without any
imagesetter reset.
Causes the AVDIAG to first issue a soft reset (as
described previously), await a ready condition from
the imagesetter and then exit the program.
Causes the AVDIAG to first issue a hard reset (as
described previously), await a ready condition from
the imagesetter and then exit the program.
Allows the user to enter commands from the DOS
prompt such as delete, copy, dir without exiting the
AVDIAG program. After entering DOS commands,
type exit to return to the AVDIAG program.