Avantra 36/44 Service Manual
1
3
Figure 1-14 Securing the buffer to the imagesetter.
18. Open the right side door on the imagesetter. See the Avantra 36/44 Image-
setter Service Manual, Chapter 4, Section 4.2.1 Right/Left Side Covers.
19. Remove the black plastic plug located at the bottom and inside rear of the
imagesetter.
20. Open the lower right panel on the buffer by pulling the panel straight out
(see Figure 1-4).
1-16 Installation
2
–Buffer. –Imagesetter.
–Hex bolt (1 of 2).